燃?xì)獍l(fā)電機組在長時間使用后，難免會出現一些問題，其中比較常見的就是發出異常響聲，不少客戶在遇到這種故障時都有些驚慌，以為機組出現了大毛病，為了幫助客戶解決這個問題，今天海興就來告訴大家遇到燃?xì)獍l(fā)電機組發出異常響聲時該怎么辦。

After a long time of use, the gas generator set will inevitably have some problems, among which the more common one is the abnormal sound. Many customers are alarmed when they encounter this kind of fault and think that there is a big problem with the unit. In order to help customers solve this problem, Haixing will tell you what to do when the gas generator set makes abnormal sound.

當您聽到燃?xì)獍l(fā)電機組在運行進程中發出不正常的響聲時，要確定響聲是來自何處，是來自氣門室內部、機體內部、前蓋板處、發電機與柴油機的接合處還是汽缸內。當確定部位后，就要按照柴油機的工作原理進行判定。

When you hear the abnormal sound from the gas generator set during operation, you should first determine where the sound comes from, whether it comes from the valve chamber, the inside of the engine body, the front cover plate, the joint between the generator and the diesel engine or the cylinder. When the position is determined, it should be determined according to the working principle of the diesel engine.

如果聽到異常響聲在機體內部時，應迅速停機，打開柴油機的機體側蓋板，用手推動連桿的中間位置，假如響聲在連桿的上部，此時可以判斷是活塞與連桿銅套泛起故障。假如在晃蕩的進程中發現響聲在連桿的下部，則可以判斷是連桿與軸頸的間隙過年夜或曲軸本身有故障。

If the abnormal sound is heard inside the engine body, stop the machine quickly, open the side cover plate of the diesel engine body, and push the middle position of the connecting rod by hand. If the sound is on the upper part of the connecting rod, it can be judged that the piston and the copper sleeve of the connecting rod are faulty at this time. If the sound is found in the lower part of the connecting rod during the sloshing process, it can be judged that the gap between the connecting rod and the journal is too large or the crankshaft itself is faulty.

所以大家在遇到燃?xì)獍l(fā)電機組發出異常響聲時大可不必驚慌，找到響聲是來自何處，即可判斷出是機組的哪個部位出現了問題，及時修好就不會再聽到機組發出異常響聲了。

Therefore, there is no need to panic when encountering the abnormal sound of the gas generator set. First, find out where the sound comes from, and then judge which part of the unit has a problem. If it is repaired in time, the abnormal sound of the unit will not be heard again.

以上就是為大家介紹的有關工業尾氣發電機組的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://m.dgtmcnc.com

The above is the detailed introduction of industrial tail gas generator set. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://m.dgtmcnc.com