The wear failure of generator set is mainly caused by vibration. Not only the vibration of the equipment itself, but also the instability of the surrounding environment will affect the equipment. Let's take a look at the vibration reduction methods that Kaichen power brings to you.

1.安裝發電機組時，建議使用減震器?？蛻魬?yīng)根據單元機箱的安裝孔，通過減震器將單元放置在平坦牢固的上方(減震器應用膨脹螺栓緊固在混凝土上)。這可以降低單元運轉時的振動和對建筑物的影響，因此在沒有特別要求的情況下，不推薦其他減振對策。

1. When installing the generator set, it is recommended to use shock absorber. The customer should place the unit on a flat and firm top through the shock absorber according to the installation hole of the unit chassis (the shock absorber should be fastened on the concrete with expansion bolts). This can reduce the vibration of the unit during operation and the impact on the building. Therefore, other vibration reduction measures are not recommended without special requirements.

2.除了單元和基礎通過減振裝置外，單元的其他部件和外部的連接也要靈活連接。例如，排煙管通過波紋減震器連接的排氣管、供油管、門油管、配線電纜等。此外，為了盡可能減少單元運行引起的周圍物體的振動，請靈活連接。

2. In addition to the unit and foundation passing through the damping device, other components of the unit and external connections should also be flexibly connected. For example, the exhaust pipe, oil supply pipe, door oil pipe, wiring cable, etc. connected by the smoke exhaust pipe through the corrugated shock absorber. In addition, in order to minimize the vibration of surrounding objects caused by unit operation, please connect flexibly.

3.注意發電機組內部零件之間的隔振需求。簡單的方法是潤滑和維護，減小零件之間的摩擦。對于發電機組本身的振動，須立即發現故障進行修理。只有這樣才能減少發電機組的磨損，確保發電機組的壽命。

3. Pay attention to the vibration isolation requirements between the internal parts of the generator set. The simple method is lubrication and maintenance to reduce the friction between parts. For the vibration of the generator set itself, the fault must be found and repaired immediately. Only in this way can we reduce the wear of the generator set and ensure the service life of the generator set.

以上就是為大家介紹的有關工業尾氣發電機組的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://m.dgtmcnc.com

The above is a detailed introduction about the industrial tail gas generator set for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://m.dgtmcnc.com