及時排出防凍液,減少腐蝕
Timely discharge antifreeze to reduce corrosion
不論是普通型防凍液還是長效型防凍液,在氣溫變高時,都應及時放出,這樣可以防止加大機件的腐蝕。因?yàn)榧尤敕纼鲆褐械姆栏瘎?huì)隨著使用時間的延長而逐漸減少或失效。
Whether it is ordinary antifreeze or long-term antifreeze, it should be released in time when the temperature becomes high, so as to prevent the corrosion of the machine parts. Because the preservatives added to the antifreeze solution will gradually decrease or become ineffective with the extension of the use time.
更有甚者,有的干脆就未加防腐劑,這就會對機件產生很強的腐蝕作用,因此應根據氣溫情況及時放出防凍液,而且在放出防凍液后應對冷卻管路進行一次完全的清洗。
What's more, some simply do not add preservatives, which will have a strong corrosive effect on the parts. Therefore, the antifreeze should be released in time according to the temperature. After the antifreeze is released, the cooling pipeline should be completely cleaned.
定期換水、清洗管路
Regularly change water and clean pipelines
不提倡勤換冷卻水,因?yàn)槔鋮s水在經過一段時間的使用后,礦物質已經析出,除非水已經很臟,可能堵塞管路及散熱器外,不要輕易更換。因?yàn)榧词剐赂鼡Q的冷卻水經過軟化處理了,但還含有一定的礦物質,這些礦物質又會沉積于水套等處而形成水垢。
It is not recommended to change the cooling water frequently, because after a period of use, the minerals in the cooling water have been precipitated. Unless the water is dirty and may block the pipeline and radiator, do not change it easily. Even if the newly replaced cooling water is softened, it still contains certain minerals, which will deposit in the water jacket and form scale.
水更換得越勤,析出的礦物質越多,水垢就越厚,因此應根據實際情況定期更換冷卻水。在更換時應對冷卻管路進行清洗,清洗液可用燒堿、煤油和水配制。同時保養各放水開關,及時更換損壞的開關,不可用螺栓、木棍、破布等替代。
The more frequently the water is replaced, the more minerals are precipitated, and the thicker the scale. Therefore, the cooling water should be replaced regularly according to the actual situation. The cooling pipeline shall be cleaned during replacement, and the cleaning liquid can be prepared with caustic soda, kerosene and water. At the same time, maintain each drain switch and replace the damaged switch in time. Bolts, wooden sticks and rags are not allowed to replace them.
The above is the detailed introduction of the gas generator set. I hope it will help you. If you have any questions, please contact us. We will provide you with services in a professional manner http://m.dgtmcnc.com